Hi-D® Jax 2- and 3-CONDUCTOR

Hi-D Jax® 2- and 3-conductor enclosed phone jacks are ideal for panel/chassis and PC

board mounting. Unitized molded housing protects springs, provides mechanical and

electrical reliability, minimizes leakage and provides low capacity between springs.

Mounts on .625 inch minimum centers in rows or arrays. .25 inch or .21 in inside diameter

bushing types, metal or thermoplastic bushings (for insulated mounting). Insulated Hi-D

surface and have fully protected enclosed internal sleeve feature. Solder lugs or PC

terminals may be selected.

MOUNTING

Jacks mount in a single .375 inch diameter hole on .625 inch minimum centers. Series

11*, N11*, NS11* and S11* mount in panels up to .156 inch thick. Series L11* and

NL11* (long bushing) mount in panels up to .25 inch thick. Jacks with PC terminals

mount on PC boards up to .094 inch thick. Formed "shoulders" on each terminal provide

stable stand-off mount. Threaded bushing permits mechanical connection to equipment

panel. Mounting hardware is supplied.

SERIES 11* - 2- and 3-conductor types, threaded metal

bushing .276 inch long. .25 inch inside diameter

bushings.

SERIES L11* - Same as Series 11*, except bushing is .375

inch long for mounting in panels up to .25 inch thick.

SERIES N11* - Same as Series 11*, except bushing is

molded thermoplastic for insulated mounting.

SERIES NL11* - Same as Series N11*, except bushing

is .375 inch long for insulated mounting in panels up to