ELECTRICAL CHARACTERISTICS

Symbol

Min

Max

Unit

Peak Reverse Blocking Current

––

1

µA

Peak Forward Blocking Current

––

1

µA

Peak On-State Voltage

––

1.3

Volts

Gate Trigger Current

––

––

200

350

µA

Gate Trigger Voltage

––

––

0.7

0.9

Volts

Holding Current

––

––

0.3

2.0

mA

NOTES:

1/ RGK current is not included in measurement.

2/ Thyristor devices shall not be tested with a constant current source for forward and reverse blocking capability such that the voltage

applies exceeds the rated blocking voltage.

3/ Thyristor devices shall not have a positive bias applied to the gate concurrently with a negative potential applied to the anode.

4/ Unless Otherwise Specified, All Electrical Characteristics @

Available Part Numbers:

SFS1826/18; SFS1827/18; SFS1828/18; SFS1829/18

PIN ASSIGNMENT (Standard)

Package

Cathode

Gate

Anode

TO-18 (/18)

Pin 2

Pin 3

Pin 1

*For information on curves, contact the Factory Representative for Engineering Assistance.

NOTE: All specifications are subject to change without notification.

SCD's for these devices should be reviewed by SSDI prior to release.

DATA SHEET #: SCR005A

DOC

Solid State Devices, Inc.

14830 Valley View Blvd * La Mirada, Ca 90638

Phone: (562) 404-7855 * Fax: (562) 404-1773

SFS1826 thru SFS1829