TL712CP_14 datasheet(2/17 Pages) TI1

2 / 17 page

TL712

DIFFERENTIAL COMPARATOR

SLCS002D − JUNE 1983 − REVISED AUGUST 2003

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

schematics of inputs and outputs

EQUIVALENT OF EACH

DIFFERENTIAL INPUT

VCC

Input

4 k

Ω

Nom

960

Ω

Nom

960

Ω

Nom

VCC

8.3 k

Ω

Nom

VCC

Ω

Nom

Output

EQUIVALENT OF EACH ENABLE INPUT

TYPICAL OF ALL OUTPUTS

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage, VCC (see Note 1)

7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID (see Note 2)

±25 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage, VI, any differential input

±25 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output enable voltage

7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Low-level output current, IOL

50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Notes 3 and 4): D package

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

P package

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

PS package

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

149

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . .

Operating virtual junction temperature, TJ

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated in the “recommended operating conditions” section of

this specification is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to the network ground.

2. Differential voltage values are at IN+ with respect to IN −.

3. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

4. The package thermal impedance is calculated in accordance with JESD 51-7.

TL712CP 数据表(PDF) 2 Page - Texas Instruments

TL712CP 数据表(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

数据表下载

链接网址

TL712CP 数据表(PDF) 2 Page - Texas Instruments

TL712CP 数据表(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

数据表 下载

链接网址

数据表下载