E3Z

E3Z

15

J

ADJUSTMENT

Slits for Through-beam Models (E39-S65A/B/C/D/E/F) Sold Separately

Hook

Protruding

portion

Lower

indented

portion

Upper indented mounting portion

Sensor

Slit

Mounting Method

1. Hook the upper protruding portion of the Slit to the upper

indented mounting portion of the Sensor and adjust the posi-

tion of the Slit so that the Slit will be in parallel to the lens side

of the Sensor.

2. Press the lower protruding portion of the Slit onto the indented

mounting portion of the Sensor until the Slit snaps in.

Mounting Condition

Side View

Front View

Removal Method

1. Press the upper portion of the Slit.

2. Disconnect the lower protruding portion of the Slit from the

Sensor and remove the Slit.

Cat. No. CEDSAX4

11/01

Spec

ifications subject to change without notice.

Printed in U.S.A.

OMRON ELECTRONICS LLC

One East Commerce Drive

Schaumburg, IL 60173

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V8

416-286-6465

R

OMRON ON--LINE

Global -- http://www.omron.com

USA -- http://www.omron.com/oei

Canada -- http://www.omron.com/oci