Accessories for standard Quick mating connectors

Pin protection shroud for panel mount receptacle (SMS--CSB1)

When pins are inserted into the panelmount

receptacle half (SMS--R1) of the Quick

mating connector, an optional pin

protection shroud can be installed.

The shroud is mounted at the same time

as the receptacle by holding the shroud

against the mating side of the panel with

both cutouts lined up. The receptacle is

then inserted in place, trapping the shroud

between the receptacle and panel. The use

of the pin protection shroud reduces the

allowable thickness of the panel from 2.3 to

1.6 mm max.

Strain relief hoods

(SMS—H1)

Part number

Number of contact

A

B

positions

SMS2CSB1

2

19.8

SMS3CSB1

3

23.4

18.8

SMS4CSB1

4

28.4

SMS6CSB1

6

23.9

SMS9CSB1

9

29.0

SMS12CSB1

12

23.4

34.0

SMS15CSB1

15

39.1

SMS18CSB1

18

44.2

SMS24CSB1

24

28.4

SMS36CSB1

36

54.1

34.0

Discrimination pins

For discrimination pins on both standard Quick mating and Quick mating Pin Headers cable and boardmount:

See accessories section.

Separate strain relief hoods are available for all standard plugs SMS—P1.

The hoods consist of identical halves that snap into position on the plug and are secured in

place with the cable tie drawn tightly around the cabe entry collar.

Catalog numbers designate a complete hood (2 halves) SMS—H1

The cable tie is not included (TF4D – TF5D)

Two three and four position hoods are single piece units