Single-Phase Auto Transfer Switch / Switched PDU,

1.4kW 15A 120V, 1U Horizontal Rackmount, 8 NEMA

5-15R outlets, 2 NEMA 5-15P inputs

MODEL NUMBER: PDUMH15ATNET

Description

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network

devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The

ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary

power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until

the primary input is restored and stable. Switched PDU features include individually controllable output

receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources

occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless

of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant

hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord

is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer

time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains

circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both

input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or

secondary power availability.

Features

120V 15A Power Disrtibution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched output receptacles (Agency de-rated to 12A continuous)

ATS features provide redundant power for critical network equipment with a single input power cord

Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface

Visual meter reports output power consumption in amps

8 switched NEMA 5-15R outlets; 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth

Two NEMA 5-15P inputs connect to separate PRIMARY and SECONDARY power sources

ATS normally maintains output sourced from the primary input; As primary input power fails or becomes unstable, the ATS will switch to power equipment

from the secondary input until power on the primary input is restored and stable

Highlights

Single phase 15A 120V Auto

Transfer Switch / ATS PDU

Enables redundant-power option

for single-corded network devices

Separate primary & secondary

inputs connect to any two

compatible power sources

1U horizontal rackmount; 2

NEMA 5-15P inputs; 8 NEMA

5-15R outlets

Individually switched outlets,

network interface and 2 digit

visual current meter

Applications

ATS PDU systems provide a

redundant power option with

individual outlet control for

single-corded network devices

Package Includes

PDU with attached 5-15P input

power cord

Detachable C13 to NEMA 5-15P

12 ft/3.6m secondary input cord

Installable 1U mounting brackets

User manuals with warranty

information

1 / 4