Single-Phase Auto Transfer Switch / Switched PDU

1.9kW 20A 120V, 1U Horizontal Rackmount, 16

5-15/20R outlets, 2 L5-20P / 5-20P inputs

MODEL NUMBER: PDUMH20ATNET

Description

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network

devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The

ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary

power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until

the primary input is restored and stable. Switched PDU features include individually controllable output

receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources

occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless

of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant

hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord

is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported

by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for

use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup

generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to

prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power

availability.

Features

120V 20A Power Distribution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched outlets (Agency de-rated to 16A)

ATS features provide redundant power for critical network equipment with a single input power cord

Switched PDU features enable programmable or real-time control of individual outlets via built-in network interface

Visual meter reports output power consumption in amps

16 switched NEMA 5-15/20R outlets; 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth

Two NEMA L5-20P inputs (includes two 5-20P adapters) connect to separate PRIMARY and SECONDARY inputs

ATS normally maintains output sourced from the primary input; As primary input power fails or becomes unstable, the ATS will switch to power equipment

Highlights

Single phase 20A 120V Auto

Transfer Switch / ATS PDU

Enables redundant-power option

for single-corded network devices

Separate primary & secondary

inputs connect to any two

compatible power sources

1U horizontal rackmount; 2

L5-20P / 5-20P inputs; 16

5-15/20R outlets

Individually switched outlets,

network interface and 2 digit

visual current meter

Applications

ATS PDU systems provide a

redundant power option with

individual outlet control for

single-corded network devices

Package Includes

PDU with attached L5-20P input

power cord

Detachable C19 to NEMA

L5-20P 12 ft/3.6m secondary

input cord

Two NEMA L5-20R to NEMA

5-20P plug adapters

Installable 1U mounting brackets

User manual with warranty

information

1 / 5