V2DIP2-64 datasheet(2/24 Pages) FTDI

2 / 24 page

Document Reference No.: FT_000166

V2DIP2-64 VNCL2-64Q Development Module Datasheet Version 1.01

Clearance No.: FTDI# 155

1 Introduction

V2DIP2-64 module is designed to allow rapid development of designs using the VNC2-64Q IC. The

V2DIP2-64 is supplied as a PCB designed to fit into a 60 pin 0.8” wide, 0.1” pitch DIP socket.The module

provides access to the UART, parallel FIFO, and SPI interface pins of the VNC2-64Q device, via its IO bus

pins. Two USB ports are accessed via type A USB connectors.

Figure 1.1 - V2DIP2-64

The VNC2 is one of the family of Vinculum devices from FTDI : the second of FTDI’s Vinculum family of

Embedded dual USB host controller integrated circuit devices. The device is capable of handling the USB

Host Interface for a variety of different USB device classes, e.g. BOMS (bulk only mass storage), Printer,

HID (human interface device) etc. When interfacing to mass storage devices such as USB Flash drives,

VNC2 also transparently handles the FAT File structure.

Communication with non USB devices such as a low cost microcontroller is accomplished via either UART,

SPI or parallel FIFO interfaces using a simple to implement command set. VNC2 provides a new cost

effective solution for providing USB Host capability into products that previously did not have the

hardware resources available.

The device comes with a Debugger interface with bus master functionality and suite of tools which allows

customers to create their own firmware (Compiler – Linker – Debugger – Assembler–IDE).

The Vinculum-II VNC2 family of devices are available in Pb-free (RoHS compliant) 32-lead LQFP, 32-lead

QFN, 48-lead LQFP, 48-lead QFN, 64-Lead lQFP and 64-lead QFN packages

V2DIP2-64 数据表(PDF) 2 Page - Future Technology Devices International Ltd.