SPECIFICATION CONTROL DRAWING

300 Constitution Drive

Menlo Park, CA 94025, USA

THERMOFIT

DEVICES

TITLE:

SOLDERSLEEVE SHIELD TERMINATION

ENVIRONMENT RESISTANT WITH LEAD

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.

INCHES DIMENSIONS ARE BETWEEN BRACKETS.

DOCUMENT NO.:

S02-07/-08/-10-R-XX

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS IN

MICRON

TE Connectivity reserves the right to amend

this drawing at any time. Users should

evaluate the suitability of the product for

their application.

DCR NUMBER:

D000419

REPLACES:

N/A

DRAWN BY:

M. FORONDA

DATE:

27-Sept-00

PROD. REV.

SEE TABLE

DOC ISSUE:

2

SCALE:

None

SIZE:

A

SHEET:

1 of 1

Product Revision

Component Dimensions

Cable Dimensions

Product

Name

Ident.

Code

L

±1.75

(L

±0.07)

øB

min

øC

min

H

min

øD

max

øE

max

øF

min

øG

max

S02-07-R-XX

*

SIZE2R

16.5

(0.650)

2.65

(0.105)

3.68

(0.140)

8.25

(0.325)

2.65

(0.105)

3.68

(0.140)

1.40

(0.055)

0.72

(0.030)

S02-08-R-XX

*

SIZE3R

16.5

(0.650)

4.30

(0.170)

5.08

(0.200)

8.25

(0.325)

4.30

(0.170)

5.08

(0.200)

2.15

(0.085)

1.25

(0.050)

S02-10-R-XX

*

SIZE5R

19.1

(0.750)

7.00

(0.275)

7.60

(0.300)

8.25

(0.325)

7.00

(0.275)

7.60

(0.300)

4.30

(0.170)

2.50

(0.100)

* Consult Raychem for individual product revision. Contains more than 1 part name.

MATERIALS

1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.

2. SOLDER PREFORM WITH FLUX:

SOLDER:

TYPE Sn63 per ANSI J-STD-006.

FLUX:

TYPE ROL1 per ANSI-J-STD-004.

THERMAL INDICATOR: Color change violet to colorless.

3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue.

4. PRE-INSTALLED LEAD: MIL-W-22759/32-22-XX*. (Raychem 55A0111-22-XX*)

*XX: Part name and lead callout shall be replaced with lead color designation per MIL-STD-681.

Colors available: solid and with single stripe.

APPLICATION

1. These parts are designed to provide an environment protected shield termination on cables, rated for 105

°C minimum, meeting

the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.

For compatible insulations, see SAE-AS83519/2 or consult Raychem.

2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem

Specification RT-1404 and SAE-AS83519/2.

3. For assembly information, refer to Raychem document RCPS-100-70.

4. Parts shall be marked with identification code per table.

For best results,prepare the cable as shown:

- Strip length of shield: 6.35 – 8.25 (.250 - .325)

- Use methods (a) or (b) with cable rated for 125

°C and above. Use method (c) for cables rated for 105°C and cable with spiral

wrapped shields.

a) Window Strip

b) End Strip

c) End Strip with Fold Back