GMS36 datasheet(20/109 Pages) HYNIX

20 / 109 page

2-4

Pin Description

Function

I/O

Connected to 2.0~ 3.6V power supply

Connected to 0V power supply.

4-bit input port with built in pull-up resistor.

STOP mode is released by "L" input of each pin. ( masked option)

K0 ~ K3

Input

GND

VDD

Each can be set and reset independently.

The output is the structure of N-channel-open-drain.

4-bit I/O port. (Input mode is set only when each of them output "H".)

In outputting, each can be set and reset independently(or at once.)

The output is in the form of C-MOS.

Pull-up resistor and STOP release mode can be respectively selected

as masked option for each pin. (It is released by "L" input at STOP)

High current output port. The output is in the form of CMOS.

The state of large current on is "H".

D0 ~ D9

Output

R0 ~ R3

I/O

REMOUT

Output

Oscillator input. Input to the oscillator circuit and connection point for

ceramic resonator.

Internal capacitors available at kHz version.

A feedback resistor is internally connected between this pin and OSC2.

Connect a resonator between this pin and OSC1.

OSC1

Input

OSC2

Output

Chapter 2. GMS37XXX

GMS36 数据表(PDF) 20 Page - Hynix Semiconductor

GMS36 数据表(HTML) 20 Page - Hynix Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

GMS36 数据表(PDF) 20 Page - Hynix Semiconductor

GMS36 数据表(HTML) 20 Page - Hynix Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载