2

Parameter

Red

Yellow

Green

Units

Peak Forward Current

90

60

90

mA

25

20

25

mA

30

20

30

mA

135

85

135

mW

5

5

5

V

500

500

500

mA

(10

µsec Pulse)

LED Junction Temperature

110

110

110

°C

Operating Temperature Range

-55 to +100

-55 to +100

-20 to +100

°C

Storage Temperature Range

-55 to +100

Lead Soldering Temperature

260

°C for 5 seconds

[1.6 mm (0.063 in.) from body]

Notes:

1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.

2. For Red and Green series derate linearly from 50

°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.

3. For Red and Green series derate power linearly from 25

°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at

1.6 mW/

°C.

4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED

die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the

Absolute Maximum Ratings.

Part Numbering System

HLMP - 1 x xx - x x x xx

Mechanical Option

00: Bulk

01: Tape & Reel, Crimped Leads

02: Tape & Reel, Straight Leads

A1: Right Angle Housing, Uneven Leads

A2: Right Angle Housing, Even Leads

Color Bin Options

0: Full Color Bin Distribution

Maximum Iv Bin Options

0: Open (no max. limit)

Others: Please refer to the Iv Bin Table

Minimum Iv Bin Options

Please refer to the Iv Bin Table

Lens Options

20: Untinted or Microtinted, Non-diffused

21: Tinted, Non-diffused

Color Options

3: GaP HER

4: GaP Yellow

5: GaP Green

Package Options

1: T-1 (3 mm)