Ordering Information:

MO290-RK ....Water Restoration Contractor Kit

Specifications subject to change without notice.

Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.

www.extech.com

6/26/09 - R1

Kit includes:

- Monitor moisture in wood and building materials with

virtually no surface damage

- Included Pin Probe, Hammer Probe, Deep Wall Probe, and Base

Board Probe for contact moisture readings

- Patented InfraRed Thermometer with laser pointer for

non-contact surface temperature measurement

- Built-in RH/Temperature probe measures Relative Humidity,

Air Temperaure, plus Grains Per Pound (GPP), Dew Point (DP),

and Vapor Pressure

- Measurement Ranges:

Pinless Moisture: 0 to 99% (limited by wood type)

Pin-type Moisture: 6 to 40% (Wood); 13 to 99% (Materials)

Temperature (Air): -4 to 140°F (-20 to 60°C)

Temperature (IR): -5 to 392°F (-50 to 200°C)

Humidity: 0 to 99%RH

Vapor Pressure: 0 to 20.0kPA

+ GPP (g/kg) Calculation

- Datalogs 16,000 RH and 16,000 Temperature readings

- User-programmable sampling rate and alarm thresholds

- USB interface for easy setup and data download using the

included software

protection and organization for the meters and accessories

whenever they are needed

A complete solution for the Restoration Contractor

Use combination moisture meter/thermal hygrometer to capture all ambient conditions as well as moisture levels

in one meter. Includes essential probes to measure moisture levels under baseboards, in between walls, and in hard

wood and plywood subfloors. Use USB Humidity/Temperature datalogger for GPP calculations

Water Restoration Contractor Kit

MO290-P

Moisture Pin Probe

MO290-HP

Moisture Hammer Probe

MO290-EP

Moisture Extension Probe

MO290-BP

Moisture Baseboard Probe

Moisture Probes included: