Other brands and names are the property of their respective owners

Information in this document is provided in connection with Intel products Intel assumes no liability whatsoever including infringement of any patent or

copyright for sale and use of Intel products except as provided in Intel’s Terms and Conditions of Sale for such products Intel retains the right to make

changes to these specifications at any time without notice Microcomputer Products may have minor variations to this specification known as errata

July 1994

COPYRIGHT

INTEL CORPORATION 1995

Order Number 270909-006

8XC196KB8XC196KB16

COMMERCIALEXPRESS CHMOS MICROCONTROLLER

Y

8 Kbytes of On-Chip ROMOTP

Available

Y

232 Byte Register File

Y

Register-to-Register Architecture

Y

28 Interrupt Sources16 Vectors

Y

175 ms 16 x 16 Multiply (16 MHz)

Y

30 ms 3216 Divide (16 MHz)

Y

Powerdown and Idle Modes

Y

Five 8-Bit IO Ports

Y

16-Bit Watchdog Timer

Y

12 MHz and 16 MHz Available

Y

Dedicated 15-Bit Baud Rate Generator

Y

Dynamically Configurable 8-Bit or

16-Bit Buswidth

Y

Full Duplex Serial Port

Y

High Speed IO Subsystem

Y

16-Bit Timer

Y

16-Bit UpDown Counter with Capture

Y

Pulse-Width-Modulated Output

Y

Four 16-Bit Software Timers

Y

10-Bit AD Converter with SampleHold

Y

HOLD HLDA Bus Protocol

Y

Extended Temperature Available

The 8XC196KB is a 16-bit microcontroller available in three different memory varieties ROMless (80C196KB)

8K ROM (83C196KB) and 8K OTP (One Time Programmable87C196KB) The 8XC196KB is a high perform-

ance member of the MCS

96 microcontroller family The 8XC196KB has the same peripheral set as the

8096BH and has a true superset of the 8096BH instructions Intel’s CHMOS process provides a high perform-

ance processor along with low power consumption To further reduce power requirements the processor can

be placed into Idle or Powerdown Mode

Bit byte word and some 32-bit operations are available on the 80C196KB With a 16 MHz oscillator a 16-bit

addition takes 050 ms and the instruction times average 037 ms to 11 ms in typical applications

Four high-speed capture inputs are provided to record times when events occur Six high-speed outputs are

available for pulse or waveform generation The high-speed output can also generate four software timers or

start an AD conversion Events can be based on the timer or updown counter Also provided on-chip are an

AD converter serial port watchdog timer and a pulse-width-modulated output signal

The 8XC196KB has a maximum guaranteed frequency of 12 MHz The 8XC196KB16 has a maximum guaran-

teed frequency of 16 MHz All references to the 80C196KB also refer to the 80C196KB16 83C196KB Rxxx

87C196KB and 87C196KB16 unless otherwise noted The ROM device does not have a speed indicator at the

end of the device name Instead it has a ROM code number

With the commercial (standard) temperature option operational characteristics are guaranteed over the tem-

perature range of 0 Cto a70 C With the extended temperature range option operational characteristics are

guaranteed over the temperature range of b40 Cto a85 C

Package Designators N e 68-pin PLCC S e 80-pin QFP (commercial only) Prefix Designators T e Extend-

ed Temperature

Other brands and names are the property of their respective owners