additional servers over IP with included PowerAlert monitoring software

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery

voltage and remaining battery capacity

Emergency Power Off (EPO) interface with cable

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot of connected

devices

Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment

Supports Tripp Lite's WatchDog software application (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Specifications

OUTPUT

Output Capacity Details

2250W maximum with up to 1 external battery pack; 1500W maximum with 2 or more external battery packs

Output Volt Amp Capacity (VA)

3000

Output kVA Capacity (kVA)

3

Output Watt Capacity (Watts)

2250

Output kW Capacity (kW)

2.25

Power Factor

0.75

Nominal Output Voltage(s)

Supported

220V; 230V; 240V

Nominal Voltage Details

230v nominal inverter output voltage

Frequency Compatibility

50 / 60 Hz

Output Voltage Regulation (Line

Mode)

-19% +8%

Output Voltage Regulation (Battery

Mode)

+/- 5%

Output Receptacles

(8) C13; (1) C19

Included Output Power Cables

Includes 3 C13 to C14 output power cables

Load Management Receptacles

Three switchable two-outlet C13 load banks

Output Circuit Breakers

10A (x2) - each breaker protects 4 C13 outlets each, C19 is unbreakered

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

PWM sine wave

INPUT

Rated input current (Maximum Load)

15.4A

2 / 5