Features

16-Port, 1+1 User NetCommander Cat5 IP KVM Switch

Directly connect up to 16 computers/servers

Connected computers/servers can be located up to 100 ft. (30 m.) away from the KVM using inexpensive

Cat5e/6 cabling and B078-101-USB2, B078-101-USB-1, or B078-101-PS2 SIUs

Supports HD video resolutions up to 1920 x 1080, including widescreen formats such as 1680 x 1050 and

1600 x 1200

Simultaneous support for 2 users (1 local, 1 remote)

Java-based application allows for control of a target server via web browser from any location over a secure

IP connection

Multi-Level account access – Administrator and User accounts can be created, with a password being

required to access the KVM switch and your assigned permissions. Administrator accounts have full access,

while User accounts can be set up to access only the ports and features necessary to that individual.

Accessing the connected computers is a breeze; a wide range of video and mouse sync settings ensure

optimal remote session performance in any situation

Remote authentication support - RADIUS and LDAP/S

Supports both IPv4 and IPv6

PDU Control - Add IP PDU's as devices that can be controlled by the KVM. Assign individual ports on the

KVM to a PDU port to Power Cycle or Power Off/On the computer/server connected to that port.

Virtual Media allows an .iso file located in a Shared folder of a SAMBA or NFS server to be mounted to a

Target Server and accessed as if it were directly stored on it. Virtual Media data transfer rates up to 12Mbps

(B078-101-USB2 required) are supported. A B078-101-USB-1 can be used to provide Virtual Media support,

but only at speeds up to 1Mbps.

Dual Serial Ports - Connect serial manageable devices such as PDU's, firewalls, and routers.

Dual Ethernet provides redundancy in the event of a crash

Supports the highest security standards for encryption ( 128-bit SSL and HTTPS )

BIOS level control to any server’s brand and model, regardless of the server condition and network connectivity. Covers the entire spectrum of crash

scenarios.

Allows for system sent messages to SNMP server to notify of LAN failures.

Event log records events that take place on the installation, such as logins, reboots, network settings changes, etc..

Allows for the installation of a SSL certificate to ensure secure transactions between the Web servers and browsers.

Access and control the KVM via the graphical remote interface, or a text based local OSD.

Flash upgradeable firmware over the network.

Constructed of heavy-duty steel housing

Specifications

OVERVIEW

Users

2

Port Control

Hotkeys, OSD, Remote Toolbar

PC/Server Connections

VGA; USB; PS/2

Cat5 KVM Switch

Yes

Hardware Versions

A new hardware version (v2) of the

B072-016-1-IP was released in 2014,

and it requires different firmware than

was used in the previous version (v1).

In the Support tab on this web page

you will find a zip folder for the v1

KVM. In addition to including the

applicable firmware, it contains a FW

Notes file that will tell you how to

determine which hardware version

you have, and therefore, which

firmware you need to use. If you have

a v2 KVM, the latest firmware is that

which came pre-installed on the KVM.

Package Includes

B072-016-1-IP 16-Port, 1+1 User

NetCommander Cat5 IP KVM

Switch

Rackmount Hardware

Power Cord

Owner's Manual CD

Quick Start Guide

2 / 3