| 数据搜索系统,热门电子元器件搜索 |
|
UM0402 数据表(PDF) 5 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0402 数据表(HTML) 5 Page - STMicroelectronics |
|
5 / 35 page ![]() UM0402 Overview 5/35 A 16 MHz crystal is used for obtaining an 8 MHz CPU clock for the micro. This meter has SPI EEPROM (M95256) with 256 Kb of memory, and SPI RTC (M41T94) for date and time functions. 3V rechargeable battery is used to supply RTC for when the line power is down and the battery is fully discharged. Figure 1. Multi-tariff meter board The board has a Viper12-based switching power supply. When line power is not available, power to the application is supplied by 4.8V rechargeable battery. An LCD display is present with 24x4 segments, customized for electricity meter use. This board also supports IRDA protocol IEC62056-21 mode C. There are two 10-pin connectors, one to program STPM14 internal OTP registers, and one for microcontroller ICP. Two jumpers are used for the microcontroller reset and to simulate a box tamper. A push button is used to display various parameters on the LCD display. 30 seconds after the switch is pressed without further activity, the LCD screen once again displays the first screen showing accumulated kWh and eventual error symbols. However, repeated presses of the button cycle through the display of additional information. See Table 8 on page 19 for full details on the parameters displayed on the LCD. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |