| 数据搜索系统,热门电子元器件搜索 |
|
UM1008 数据表(PDF) 5 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM1008 数据表(HTML) 5 Page - STMicroelectronics |
|
5 / 32 page ![]() UM1008 Connection procedure Doc ID 18032 Rev 2 5/32 2 Connection procedure In order to connect EVALKITST7570-1 to the PC, the user must follow the instructions below: 1. Connect the board to the PC using a USB cable. 2. Plug a power cable into the board AC power plug. 3. Plug the power cable into the power socket. 4. As soon as the board is powered, the power LEDs switch on. USB/UART adapter driver installation The USB communication between the EVALKITST7570-1 and the PC is managed through an onboard USB to UART adapter. This device needs the installation of the correct device software driver on the PC. Assuming that the device drivers are not yet installed, follow the instructions below: 1. Download the latest available Virtual COM Port (VCP) drivers from the FTDI web site (www.ftdichip.com) and unzip them to a location on the host PC. 2. Connect the EVALKITST7570-1 to a spare USB port on the host PC. The screen shown in Figure 2 is displayed. Select “No, not this time” from the options available and then click “Next” to proceed with the installation. Figure 2. Hardware update wizard screen |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |