UM1518

Services

Doc ID 022791 Rev 2

21/37

Figure 17.

PingRequest and PingConfirm graphical tools

5.4.2

Reset commands

The ResetRequest command can be properly formed and sent to the modem through a

dedicated button on the bottom part of the Modem Configuration tab.

After pressing the button, the console displays the command sequence, declaring it as a

“Software Reset” and returning the auto-reconfiguration feature status, as displayed in

Figure 18:

Figure 18.

ResetRequest command: console view

In the case of a ResetIndication command (generated for example if the RESETN pin is

driven at a low state), the unsolicited occurrence is directly displayed on the console and is

named as a “Power On Reset” event, as shown in Figure 19:

Data to be inserted

within a PingRequest

command

Data returned by

ST7580 within a

PingConfirm command

Button to send a PingRequest

to ST7580

Led displaying the

PingConfirm status

AM11962v1

AM11963v1