UM0460

Getting started

5/23

1

Getting started

1.1

System requirements

The system operates in standalone mode by powering externally using a power supply

adaptor with a voltage range of 8 V - 19 V and current capability of at least 500 mA.

Note:

Do not run the demo for a long period at higher input voltage (>12 V) due to excessive

heating of the voltage regulator (U1). If required, attach a suitable heat sink.

1.2

Package content

The evaluation board package includes the following:

●

Hardware

–

One evaluation board

●

Documentation

–User manual

1.3

Hardware Installation

The evaluation board can be powered through an external power supply adaptor having two

outputs (8 V - 19 V and GND).

Figure 1.

Evaluation board (STEVAL-CBP003V1) - front view

The major components present on the board - front view are (see Figure 1):