µPD17P236

12

Data Sheet U14776EJ1V0DS00

2.4 Processing of Unused Pins

Process the unused pins as follows:

Table 2-1. Processing of Unused Pins

Pin

Recommended Connection

Leave open.

Input

Output : Leave open.

Connect to GND.

REM

Leave open.

INT

Connect to GND.

IC1, IC2

These pins cannot be used.

Leave open.

2.5 Notes on Using the RESET and INT Pins

In addition to the functions shown in 2. PIN FUNCTIONS, the RESET pin also has the function of setting a test mode

(for IC testing) in which the internal operations of the

µPD17P236 are tested.

normal operation, the

For example, if the wiring length of the RESET or INT pin is too long, noise superimposed on the wiring line of the pin

may cause the above problem.

Therefore, keep the wiring length of these pins as short as possible to suppress the noise; otherwise, take noise

preventive measures as shown below by using external components.

and RESET/INT pin

and RESET/INT pin

RESET, INT

RESET, INT

Diode with