UM0682

Communicating with the PC

5/10

2

Communicating with the PC

To connect the demonstration board to a PC, first provide power to the board using one of

the previously explained methods, then connect the USB cable.

When connecting the STEVAL-TLL005V1 demonstration board to the PC for the first time, a

prompt to install the driver will appear (the driver is included in the DVD). To install the driver,

provide the path to stmcdc.inf when prompted.

Once the board is connected to the PC and the driver installed, the two GUIs

(Packet_Creator_ST7.exe and Register_Controller.exe) can be used. The installation file for

the GUI is included in the DVD.