UM0756

Getting started

Doc ID 16031 Rev 1

9/28

2.4

Powering on the system

The system is easy to use. As soon as the DC power supply is connected, the system is

running. The power supply connections should be made as shown in Figure 4.

Figure 4.

Power supply connections

At power-on a welcome message "STLED316S" is displayed, which scrolls across the LED

display from right to left.

After approximately 4-5 seconds, the last set of channel, volume and brightness values are

displayed.

Figure 5.

System stable, ready to use

2.5

Default setting of the system

The system is programmed with the following default settings:

●

Channel = minimum (00)

●

Volume = minimum (00)

●

Brightness = maximum, which is level 8 (14/16)