Continuous Output Capacity (Watts)

1000

Peak Output Capacity (Watts)

2000

Output Nominal Voltage

230V

Output Voltage Regulation

Nominal 230v +/- 5% until LBW. Peak coltage 360v

Output Frequency Regulation

50/60 Hz (+/- 0.5 Hz)

Overload Protection

Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads

Pure Sine Wave Output

Yes

INPUT

Nominal Input Voltage(s) Supported

230V AC

Recommended Electrical Service

DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full

continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive

applications, professional hardwire installation with 400A minimum battery system fusing is recommended.

Maximum Input Amps / Watts

DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger

load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to

66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)

Input Connection Type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate

Voltage Compatibility (VAC)

230

Voltage Compatibility (VDC)

12

BATTERY

Expandable Battery Runtime

Runtime is expandable with any number of user supplied wet or gel type batteries

DC System Voltage (VDC)

12

Battery Charge

Includes 4/40 amp DC charging system adjustable.

Expandable Runtime

Yes

USER INTERFACE, ALERTS & CONTROLS

Front Panel LEDs

Set of front panel LED's display inverter status, charger status, as well as battery voltage status

Switches

The inverter provides a RJ-45 port for optional APSRMSW remote control. RJ45 port operates with standard RJ485

interface (APSRMSW sold separately)

Audible Alarm

Audible status indicators 10.5V (low battery)/21V start alarm

PHYSICAL

Unit Dimensions (hwd / in.)

7.25 x 8.75 x 18

Unit Dimensions (hwd / cm)

18.41 x 22.22 x 45.72

Unit Weight (lbs.)

35.5

Unit Weight (kg)

16

Cooling Method

Fan

Material of Construction

Powder coated Steel

2 / 3