Continuous Output Capacity (Watts)

2000

Peak Output Capacity (Watts)

4000

Output Nominal Voltage

230V

Output Voltage Regulation

LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):

Maintains sine wave output voltage of 230 VAC (+/-5%).

Output Frequency Regulation

50 Hz (+/- 0.3 Hz)

Overload Protection

Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads

Pure Sine Wave Output

Yes

INPUT

Nominal Input Voltage(s) Supported

230V AC

Recommended Electrical Service

DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full

continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive

applications, professional hardwire installation with 400A minimum battery system fusing is recommended.

Maximum Input Amps / Watts

DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger

load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to

66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)

Input Connection Type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate

Voltage Compatibility (VAC)

230

Voltage Compatibility (VDC)

12

BATTERY

Expandable Battery Runtime

Runtime is expandable with any number of user supplied wet or gel type batteries

DC System Voltage (VDC)

12

Battery Pack Accessory (Optional)

98-121 sealed lead acid battery (optional)

Battery Charge

Selectable 6/60 amp

Expandable Runtime

Yes

VOLTAGE REGULATION

Brownout Correction

Brownout transfer point - 170V (+/- 3%)

Severe Brownout Correction

Brownout reset point - 180V (+/- 3%)

USER INTERFACE, ALERTS & CONTROLS

Front Panel LEDs

Display inverter status, charger status as well as bettery voltage status

Switches

The inverter provides an RJ-45 port for optional APSRMSW retmote control. RJ-45 port operates with standard

RS-485 interface (APSRMSW sold separately)

Audible Alarm

Audible Status indicators (see manual)

PHYSICAL

2 / 3