by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long

distances.

The SR45UB comes with a 5-year product warranty. As part of the SmartRack family, the SR45UB is compatible with Tripp Lite’s extensive range of rackmount

accessories, enabling you to customize your solution to meet any requirement.

Features

Ships fully assembled for rapid deployment and roll into place on pre-installed casters that support a rolling load capacity of 2250 lbs, allowing the

enclosures to be pre-configured and rolled to the final installation location. (Casters are removable.)

Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures

consistent rail placement without requiring time-consuming measurements.

Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting

slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable

managers side-by-side (four items per enclosure).

Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws

Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.

Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.

Maximum usable internal depth of 37 inches/94 cm (front to rear rail).

Weight ratings of 3000 lb stationary and 2250 lb rolling.

Front door is locking, reversible and removable.

Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer

to a wall.

Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4

panels total). Side panels are keyed alike to the front and rear doors.

Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center

floor tiles.

Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.

Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and

rear doors include quick-release ground wires.

Open bottom for cable access.

Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.

Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack.

Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance

Compatibility with airflow optimization accessories as well as cable management accessories.

Specifications

PHYSICAL

Installed Whole System Maximum

Rack Depth (in.)

37

Installed Whole System Maximum

Rack Depth (cm)

94.0

Installed Whole System Minimum

Rack Depth (in.)

4

2 / 4