9/23

GETTING STARTED WITH RAISONANCE IDE FOR THE ST6 MICROCONTROLLER

– Reset command. This button corresponds exactly to a hardware RESET.

– Execute each line and each function routine step by step (step into).

– Execute each line step by step (step over).

– Add the watch window.

– Add a toggle breakpoint at the selected line of the program. Click again to disable the

breakpoint.

– Add a toggle trace at the selected line of the program. Click again to disable the toggle trace.

– Select the file you want to debug.

– Run the application. If Animated Mode is selected, it runs the application at a set speed that

can be selected with the next icon. Otherwise it runs the application in real-time.

– Set the execution speed of the application in Animated Mode.

4.1 STEPPING THROUGH THE CODE

Execute the program step by step using the step over icon. Each time you click on this icon

you will see the current line changing to the next program instruction. At each step you are

then able to look at the state of the microcontroller, as explained later on.

Note: The step into icon allows you to enter the function subroutines. It is not likely that you

will need this feature at the beginning. Furthermore this is a rather tedious way of following the

execution of the program, because you really step through all the functions.

4.2 RUNNING THE CODE

You can also run the program directly using the Run icon.

Click once on the icon: it will run the application and the icon will change to

Click on the icon again and the application is stopped.

Note at the bottom of the Debug window the period of time spent running the application.