STR71xF Embedded Flash Programming with ADS

4/6

4

Specify the pathname for your binary file, or click

Note:

If the path name contains spaces you must enclose the pathname in quotes.

5

Click

Console processor view.

6

You can edit the settings if required, or press

been written to flash (see

Figure 3).

Note:

The Flash downloader lets you choose the start sector to write in. If you choose a start sector other

than zero, your image will be loaded in the specified sector, but when you boot from the on chip

Flash memory you will not see your program running.

7

If you downloaded your program at starting sector 0, then change the switch positions to boot from

Flash memory (see

Table 2) and reboot, you can see your program running.

Figure 3: Successful download to Flash memory

Table 2: STR710-EVAL switch configuration

Switch

Description

Position

• SW13

Boot mode 1:

System executes a “primary boot loader (ST-firmware)”

from Boot-FLASH then jumps to RAM

BOOTFLASH mapped at 0h

1-2

• SW14

Boot mode 0:

2-3

• SW15

Boot mode EN:

2-3