AN2316 - Application Note

ST7FLITE05 Software Description

21/24

4.3.3

Programming Software

In order to program an MCU with the generated .S19 file (compiled output), the ST Visual

Programming software should also be installed (available at www.st.com), and a dedicated

hardware programming interface (e.g. in-circuit programming stick programmer) should be

used. The Visual Programming tool provides an easy way to erase, program, and verify the

MCU content (see

Figure 11).

Note:

The inDART-STX from Softec Microsystems is also a programming tool (installation of

DataBlaze Programmer software is required).

Figure 11.

ST7 Visual Programmer