UM0225 datasheet(39/57 Pages) STMICROELECTRONICS

39 / 57 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

UM0225

3 Designing with CAPS

38/56

Click the Properties... button to view the JTAG-ISP Attributes.

This shows the device name and its instruction register length. This information may be

useful to setup the JTAG chain for 3rd party programming tools that do not have an auto-

detect function.

Click the Execute button to perform the programming operation selected, above.

If you attempt to program a device that is not blank, a warning message verifies that you

“want to do the full chip erase” before continuing. Click Yes to continue.

3.7.2

Checksum the programming file

Click the File Checksum button to generate checksums for the current programming file. The

following checksums are generated.

•

Main flash

•

Secondary flash

•

User code

•

Configuration data area, including OTP memory

•

The entire file

The output log, if enabled, shows the results of the operation, as shown in Figure 34.:

Checksum file output log.

Figure 34. Checksum file output log

3.7.3

Generate ATE file

For STR9 devices, the Serial Vector Format (SVF) or JEDEC Standard Programming

Language (STAPL) format file is not supported. The ATE Files... feature should not be used.

OTP

One-time-programmable region only

UM0225 数据表(PDF) 39 Page - STMicroelectronics

UM0225 数据表(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

数据表下载

链接网址

UM0225 数据表(PDF) 39 Page - STMicroelectronics

UM0225 数据表(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

数据表 下载

链接网址

数据表下载