UM0897

Getting started

Doc ID 17012 Rev 1

7/25

3.

These images should be given names as advised below:

Name the images starting from 31.jpeg, 32.jpeg, …… 60.jpeg. In network mode, the

demonstration unit requests these images one by one. If the user wishes to add one file

(for example IMAGE.jpeg), first delete any file from the list (for example 40.jpeg), then

rename IMAGE.jpeg to 40.jpeg which allows the user to display that image on the TFT.

After the images are saved in the server folder, the server needs to be run in LAN

server mode through the interface provided by the server.

Figure 4.

"Techlogica" HTTP web server interface

1.4.2

IPCAM board setup

To capture images from the IPCAM system, the user should set the static IP address to that

of the IP-CAM board.