| 数据搜索系统,热门电子元器件搜索 |
|
AN4125 数据表(PDF) 9 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4125 数据表(HTML) 9 Page - STMicroelectronics |
|
9 / 15 page ![]() AN4125 Recommendations when developing the M24LRxxE_R application software Doc ID 023297 Rev 1 9/15 2 Recommendations when developing the M24LRxxE_R application software The application software has to take into account that a command might not be executed if the other channel (I²C or RF) is already processing a command. The application software should therefore check the M24LRxxE_R busy status before sending a command. 2.1 Issuing a command through the I²C channel 2.1.1 I²C request while the RF channel is busy If the M24LRxxE_R is processing a command from the RF channel, no command issued on the I²C bus will be executed, therefore none of the bytes transmitted on the I²C bus will be acknowledged (NoAck). This information can be considered as the RF busy state(a) and the application’s I²C software should include a polling loop on the RF busy state (with a timeout limit) when issuing a command on the I²C bus. In this way, the I²C command can be completed once the RF command under process has completed. Figure 8. I²C polling when the RF channel is processing a command a. In the same way as during an internal write cycle, the M24LRxxE_R is “busy” during tW (please refer to the M24LRxxE_R datasheet for more details about the polling loop during tW). |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |