DocID024513 Rev 1

23/32

UM1632

Application setup

Figure 9. Slave device setup (STEVAL-ILM001V1 and STM8L1526-EVAL board)

Figure 10. Master Device setup (ST7 DALI Master Board)

6.

For the master device, connect the serial cable (RS-232) to the PC and the ST7 DALI

master board and also connect the 12 V adapter to the master board, as shown in

Figure 10.

7.

The kit is now ready for operation (two LEDs should be ON, one on the STEVAL-

ILM001V and one on the STM8L1526-EVAL).