2 of 20

RF5345

DS120215

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.

Absolute Maximum Ratings

Parameter

Rating

Unit

DC Supply Voltage

5.0

V

DC Supply Current

240

mA

Operating Temperature Range

(Full Spec Compliant)

-10 to +75

°C

Extreme Operating Temperature

(Derated Performance)

-40 to -10

°C

+75 to +85

°C

Storage Temperature

-40 to +150

°C

Maximum TX Input Power for

11b/11g/11n (No Damage)

+5

dBm

Solder Reflow Temperature

260

°C

Moisture Sensitivity

MSL2

Parameter

Specification

Unit

Condition

Min.

Typ.

Max.

2.4GHz Transmit Parameters

Compliance

IEEE802.11b, IEEE802.11g,

FCC CFG 15.247,.205,.209, EN and JDEC

Operating Conditions

voltage=2.7V to 4.8V,

Temp=-10°C to +75°C, Freq=2.4GHz to 2.5GHz,

pulsed at 1% to 99% duty cycle, unless otherwise noted

Frequency

2.4

2.5

GHz

Output Power

11g

15.5

17

dBm

Measured with standard IEEE 802.11g waveform,

OFDM, 54Mbps, 64QAM meeting EVM requirements

11b

18.5

20

dBm

Measured with standard IEEE 802.11b waveform,

1Mbps, CCK, meeting ACP requirements

EVM*

3.3

4.0

%

At rated output power into 50

 output (Dynamic and

Non-Dynamic)

Adjacent Channel Power

ACP1

-36

-33

dBc

At rated output power

ACP2

-56

-52

dBc

At rated output power

Gain

23

25

dB

Gain Variation

-0.5

0.5

dB/V

Frequency

-0.5

+0.5

dB

In-band frequency slope

Power Detect

Power Range

0

23

dBm

Voltage Range

0.2

2.0

V

Input Resistance

10

k



Input Capacitance

5

pF

-1

+1

dB

Sensitivity

>10dBm

25

mV/dB

8

mV/dB

*The EVM specification is obtained with a signal generator that has an EVM level <0.7%.

Caution! ESD sensitive device.

Exceeding any one or a combination of the Absolute Maximum Rating conditions may

cause permanent damage to the device. Extended application of Absolute Maximum

Rating conditions to the device may reduce device reliability. Specified typical perfor-

mance or functional operation of the device under Absolute Maximum Rating condi-

tions is not implied.

RoHS status based on EUDirective2002/95/EC (at time of this document revision).

The information in this publication is believed to be accurate and reliable. However, no

responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any

infringement of patents, or other rights of third parties, resulting from its use. No

license is granted by implication or otherwise under any patent or patent rights of

RFMD. RFMD reserves the right to change component circuitry, recommended appli-

cation circuitry and specifications at any time without prior notice.