2 of 7

RF7413

DS111206

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com.

Absolute Maximum Ratings

Parameter

Rating

Unit

Supply Voltage in Standby Mode

6.0

V

Supply Voltage in Idle Mode

6.0

V

Supply Voltage in Operating Mode,

50

 Load

6.0

V

6.0

V

3.7

V

3.7

V

RF - Input Power

+10

dBm

RF - Output Power

+30

dBm

Operating Ambient Temperature

-30 to +110

°C

Storage Temperature

-55 to +150

°C

Parameter

Specification

Unit

Condition

Min.

Typ.

Max.

Recommended Operating

Conditions

Operating Frequency Range

1710

1785

MHz

+3.0

+3.2

+4.2

V

+3.2

+4.2

V

0.5

+4.2

V

PA used with DC-DC converter to reduce cur-

rent drain at back-off and lower power levels

0

0.5

V

PA disabled.

1.35

1.80

3.10

V

PA enabled.

0

0.5

V

Logic “low”.

1.35

1.80

3.10

V

Logic “high”.

Maximum Linear Output

(HPM)

dBm

High Power Mode (HPM)

Maximum Linear Output

(LPM)

dBm

Low Power Mode (LPM)

Ambient Temperature

-20

+25

+85

°C

Notes:

HSDPA Configuration:

c12, d15, hs24

HSPA+ Configuration: 3GPP Rel7 Subtest 1

Caution! ESD sensitive device.

Exceeding any one or a combination of the Absolute Maximum Rating conditions may

cause permanent damage to the device. Extended application of Absolute Maximum

Rating conditions to the device may reduce device reliability. Specified typical perfor-

mance or functional operation of the device under Absolute Maximum Rating condi-

tions is not implied.

The information in this publication is believed to be accurate and reliable. However, no

responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any

infringement of patents, or other rights of third parties, resulting from its use. No

license is granted by implication or otherwise under any patent or patent rights of

RFMD. RFMD reserves the right to change component circuitry, recommended appli-

cation circuitry and specifications at any time without prior notice.

RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free

per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric

materials and red phosphorus as a flame retardant, and <2% antimony in

solder.