RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS150209

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

12 of 12

RFPA2002

Pin Names and Descriptions

Pin

Name

Description

1

VBATT

Supply Voltage for bias circuitry

2

RFIN

RF Input; Connect to 50

Ω nominally, presents as DC ground.

3

VMODE1/GND

Digital control input for power mode selection. Connect to GND if HPM and MPM only operations.

4

VMODE0

Digital control input for power mode selection

5

VEN

Digital control input for enable/disable of PA

6

CPL_OUT

Coupler Output

7

GND

Ground

8

CPL_IN

Coupler Input

9

RFOUT

RF Output; Connect to 50

Ω nominally, present as DC ground

10

VCC

Supply voltage for PA stages which can be connected to battery supply or output of DC-DC converter

PCK BASE

GND

Ground Connection; This package backside should be soldered toa topside ground pad connecting to the PCB

ground plane with multiple ground via. The pad should have a low thermal resistance and low electrical

impedance to the ground plane.

Package Outline (Dimensions in millimeters)