RFPD2660

2 of 3

RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS140219

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

Nominal Operating Parameters

Parameter

Specification

Unit

Condition

Min

Typ

Max

General Performance

Power Gain

21.5

22.0

22.5

dB

f = 50MHz

22.5

23.0

24.0

dB

f = 1003MHz

Slope

[1]

0.5

1.0

2.0

dB

f = 40MHz to 1003MHz

Flatness of Frequency Response

0.8

dB

f = 40MHz to 1003MHz

Input Return Loss

-20

dB

f = 40MHz to 320MHz

-18

dB

f = 320MHz to 640MHz

-17

dB

f = 640MHz to 870MHz

-16

dB

f = 870MHz to 1003MHz

Output Return Loss

-20

dB

f = 40MHz to 320MHz

-19

dB

f = 320MHz to 640MHz

-18

dB

f = 640MHz to 870MHz

-17

dB

f = 870MHz to 1003MHz

Noise Figure

5.0

5.5

dB

f = 50MHz to 1003MHz

Total Current Consumption (DC)

420.0

440.0

mA

Distortion Data 40MHz to 550MHz

CTB

-75

-70

dBc

channels plus 75 digital channels (-6dB offset)

[2]

XMOD

-70

-65

dBc

CSO

-70

-65

dBc

CIN

60

66

dB

1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.

2. 79 analog channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +43dBmV to +50dBmV tilted output level, plus 75 digital channels, -6dB offset

relative to the equivalent analog carrier.

Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA.

Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA.

Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the

carrier being tested.

Carrier to Intermodulation Noise (CIN) - The CIN parameter is defined by ANSI/SCTE 17 (Test procedure for carrier to noise).