Hardware (not included)

> Mount with #4 Machine Screws.

> 16AWG Maximum Wire Gauge.

> Use only with constant current power supplies.

PCB Fabrication

> Layer Count: 1

> Core Material: 6061-T6 Aluminum

> Single Layer Copper Weight: 1oz

> Solder Mask: White

> Finishing Plating: Pb Free HASL

* Exceeding maximum ratings may damage the LED and cause potential safety hazards.

* Elevated operating temperatures can be expected to negatively impact the service life (lumen output)

* All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances

in the manufacturing process.

* End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions

installed.

Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant

change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are

within the

absolute maximum ratings.

Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 100C/W so that

the LED is not exposed to a condition beyond the absolute maximum ratings.

Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally

constant status with a temperature sensor or a temperature sensitive label.

Cree XP-G Color Series on Board

Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com

TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: info@marktechopto.com