RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS141203

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

10 of 16

RFSA3613

Evaluation Board Bill of Materials (BOM)

Description

Reference Designator

Manufacturer

Manufacturer's P/N

RFSA3613-410

Dynamic Details (DDI) Toronto

RFSA3613-410(B)

Digital Step Attenuator, 5MHz to 6000MHz

U1

RFMD

RFSA3613SB

CAP, 1µF, 10%, 25V, X7R, 1206

C1

Taiyo Yuden (USA), Inc.

CE TMK316BJ105KL-T

CONN, SMA, END LNCH, UNIV, HYB

MNT, FLT

J1-J4

Molex

SD-73251-4000

CONN, HDR, ST, PLRZD, 2-

PIN, 0.100”

P1

ITW Pancon

MPSS100-2-C

CONN, HDR, ST, 3 x 5, 0.100”, T/H

P3

Samtec Inc.

TSW-105-07-L-T

CONN, HDR, 2 x 4, RA, 0.100”, T/H

P4

Samtec Inc.

TSW-104-08-G-D-RA

CONN, SKT, 24-

PIN DIP, 0.600”, T/H

P2

Aries Electronics Inc.

24-6518-10

MOD, USB TO SERIAL UART, SSOP-28

M1 (See Note 1)

Future Technology Devices Int’l

UM232R

CAP, 470pF, 5%, 50V, C0G, 0402

C4

Murata Electronics

GRM1555C1H471JA01D

Jumpers

S1-S4 (See Note 2)

3M Interconnect Solutions

929950-00

DNP

C5-C13

N/A

N/A

Notes:

1.

M1 should be mounted into P2 with respect to the Pin 1 alignment of M1 andP2.

2.

Jumpers S1-S4 installed on P3.