REF1925_15 datasheet(13/31 Pages) TI

13 / 31 page

Thermal Hysterisis - V

REF (ppm)

C013

Thermal Hysteresis - V

BIAS (ppm)

C014

PRE

POST

HYST

NOM

(ppm)

REF1925, REF1930, REF1933, REF1941

www.ti.com

SBOS697 – SEPTEMBER 2014

8.2 Thermal Hysteresis

Thermal hysteresis is measured with the REF19xx soldered to a PCB, similar to a real-world application. Thermal

hysteresis for the device is defined as the change in output voltage after operating the device at 25°C, cycling the

device through the specified temperature range, and returning to 25°C. Hysteresis can be expressed by

Equation 1:

where

•

VHYST = thermal hysteresis (in units of ppm),

•

VNOM = the specified output voltage,

•

VPRE = output voltage measured at 25°C pre-temperature cycling, and

•

VPOST = output voltage measured after the device has cycled from 25°C through the specified temperature

range of –40°C to 125°C and returns to 25°C.

(1)

Typical thermal hysteresis distribution is as shown in Figure 39 and Figure 40.

Figure 39. Thermal Hysteresis Distribution (VREF)

Figure 40. Thermal Hysteresis Distribution (VBIAS)

Submit Documentation Feedback

Product Folder Links: REF1925 REF1930 REF1933 REF1941

REF1925 数据表(PDF) 13 Page - Texas Instruments

REF1925 数据表(HTML) 13 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

数据表下载