™

ANT-916-WRT-xxx DATA SHEET

Product Dimensions

Description

Features

Electrical Specifications

Ordering Information

0.75”

(19.0)

The WRT Series antenna is ideally suited for

applications such as wireless vending, security,

traffic, or power equipment which require an

unobtrusive, tamper-resistant antenna solution.

The tiny 19 x 11mm radome installs through a

small hole on the product and is anchored by a

threaded base. An adhesive foam compression

ring is used to resist the elements. The 1/4-wave

antenna also features an integral counterpoise,

which eliminates the need for a proximity

ground plane. The antenna's coax feed is available with SMA or

RP-SMA terminations. Alternate coax lengths, connectors and

custom colors are available for volume OEM customers.

Electrical specifications and plots measured on 24” x 24” reference ground plane

3.25”

(82.5)

0.207”

(5.26)

0.24”

(6.0)

0.43”

(11.0)

Typical VSWR

Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com

541-956-0931 (phone) 541-471-6251 (fax)

VSWR Graph

Rev 5-24-10

· Low cost

· Unobtrusive

· Tamper resistant

· Integral counterpoise

· Indoor / outdoor

· Adhesive or permanent mount

· Center Freq.

916MHz

· Recommended Oper. Freq.

900-930MHz

· Wavelength

1/4-wave

· VSWR

<1.9 typ. at center

· Impedance

50 ohms

· Connector

RP-SMA or SMA

· ANT-916-WRT-RPS (with RP-SMA connector)

· ANT-916-WRT-SMA (with SMA connector)

CENTER 916.000MHz

SPAN 200.000MHz

S11 SWR

1.753

RG-174 Cable Length

8.50”

(216.0)

Adhesive Ring

Remove protective plastic

before installation

M11x1.0mm

Thread