BY MICROPAC

TM

Industrial Power Controller

Micropac Industries

cannot assume any responsibility for any circuits shown, or represent that they are free from patent infringement.

Micropac

reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Micropac Industries, Inc.

 905 E. Walnut St., Garland, TX 75040  (972) 272-3571  Fax (972) 494-2281

©March 2013

www.micropac.com

E-MAIL:

Pg. 3 of 9

DC ELECTRICAL OUTPUT CHARACTERISTICS:

1. Transient overvoltage exceeding this voltage may result in damage to the device.

2. Steady state trip current is between 120% and 160% of rated current. See Figures 3 and 4.

3. I

4. Output current measured from fault onset to 10% rated load.

5. “ON” command period is 1 sec minimum with a duty cycle of 10%.

6. Inductive loads must be suppressed. Fault shutdown can be ≤ 5µs.

7. Output of 10 to 90% / 90 to 10%.

Description

Units

Device

75VDC / 10A

400VDC / 5A

Rated Operating Voltage

V

0 – 75

0 - 400

Transient Overvoltage

1

95

475

Current Rating

A

10

5

Interrupt Current Rating

2,6

%

120

160

Turn-On/Turn-Off Time

5,7

mSec

6

6

Turn- On/Turn-Off Delay

5

mSec

10

10

Trip Shutdown Time

3,4

µSec

35

35

Maximum Off-State Leakage @ Rated Voltage

µA

500

500

Maximum On-State Voltage Drop @ Rated Current

V

0.75

0.75

Maximum On-State Resistance @ Rated Current

Ohms

0.08

0.16