TECHNICAL DATA SHEET

TECHNICAL DATA SHEET

1

Low Loss N Male to N Female Test Cable Using 83% VoP PE-P300LL Coax operating to 18 GHz

The PE330 high performance test cable’s 0.3 inch diameter and 83% phase velocity offer very low loss performance up to

18 GHz. The durable stainless steel connectors and FEP jacket provide a cost effective design ideal for test environments

where a rugged cable assembly is required. The series is offered with Type N, TNC, and SMA connectors all rated to 18

GHz. A heavy Duty boot provides improved strain relief and adds to the durability of the cable assemblies. These cable

assemblies are built using a double shielded flexible cable, providing excellent shielding effectiveness of greater than 95

dB. All PE330 cable assemblies are 100% Continuity, Hi-POT, and RF tested to published specifications. Custom lengths

are built to order and shipped same day.

• 83% Velocity of Propagation

• Shielding effectiveness > 95 dB

• Maximum VSWR is < 1.35:1 to 18 GHz

• Minimum Bend Radius of 1.5 inches

• Operating Temperature range of -55 to +125 °C

• ROHS and REACH Compliant

• Same day shipment of custom lengths

• 100% Continuity, Hi-Pot, and RF tested

Configuration

Connector 1

N Male

Connector 2

N Female

Connector 2 Specification

MIL-STD-348, Figure 304-2.

Cable Type

PE-P300LL

Electrical Specifications

Frequency Range, GHz

DC to 18

Impedance, Ohms

50

Maximum VSWR

1.35:1

Velocity of Propagation, %

83

RF Shielding, dB

95

Typical Performance by Frequency

Frequency 1

Frequency, MHz

400

Insertion Loss

0.03 dB/ft [0.1 dB/m ]

Power Handling, KWatts

2.9

Frequency 2

Frequency, MHz

1000

Insertion Loss

0.05 dB/ft [0.16 dB/m ]

Power Handling, KWatts

1.8

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: N Male to N Female Low Loss Test Cable Using PE-P300LL Coax, RoHS PE331

PE331 REV 1.0

PE331

N Male to N Female Low Loss Test Cable

Using PE-P300LL Coax, RoHS