MSC1379.PDF

ISO 9001 CERTIFIED

REV C 10/15/99

8700 E. Thomas Road

Scottsdale, AZ 85252

Tel: (480) 941-6300

Fax: (480) 947-1503

DESCRIPTION (600 watt)

This 16 pin 2 line Bidirectional LOW CAPACITANCE array is designed for use

in applications where protection is required at the board level.

Providing

protection from voltage transients caused by electrostatic discharge (ESD) as

defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4, and

effects of secondary lighting as stated by IEC 1000-4-5.

These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a

peak power of 600 watts for an 10x1000

µsec pulse and are designed to be

used for secondary surge protection on telephone lines. This device can be

used in either common or differential mode applications. For example in the

circuit diagram on the following page use: TIP to (A) and (C) to ground, RING

to (B) and (D) to ground for common mode, or TIP to (A) and RING to (C), or

TIP to (B) and RING to (D) for differential mode.

FEATURES

•

600 watts Peak Pulse Power 10x1000

•

Protects up through 12 Volt Components

•

Protects 4 Unidirectional lines or 2 Bidirectional

Lines

•

Provides electrically isolated protection

•

SO-16 Packaging

•

UL 94V-0 Flammability Classification

MAXIMUM RATINGS

•

Operating Temperatures: -55

•

Storage Temperature: -55

•

Peak Pulse Power: 600 Watts (10/1000

µsec, Figure 1 and 2)

•

Pulse Repetition Rate: <.01%

ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless otherwise specified

STAND-OFF

VOLTAGE

VOLTS

BREAKDOWN

VOLTAGE

@10 mA

VOLTS

CLAMPING

VOLTAGE

VOLTS

MAXIMUM

LEAKAGE

CURRENT

µA

PEAK

PULSE

CURRENT

@ 10/1000 µS

AMPS

CAPACITANCE

(f=1 MHz)

@0V

C

PER LINE PAIR

pF

PART

NUMBER

DEVICE

MARKING

MAX

MIN

MAX

TYP

TYP

TYP

SMP6LC05

SMP6LC5.0

5.0

6.0

9.6

300

10

30

SMP6LC6.5

SMP6LC6.5

6.5

7.22

12.4

300

10

30

SMP6LC12

SMP6LC12

12.0

13.3

19.9

2.0

10

30

selected voltage should be equal to or greater than the continuous or peak operating voltage of the circuit to be

protected.

Application: The SMP6LCXX product is designed for transient voltage suppression protection of components at the

board level. It is an ideal product to be used for protection of HIGH SPEED I/O TRANSCEIVERS.

SMP6LC5.0

Thru

SMP6LC12

TVSarray

™

™ Series

MECHANICAL

•

Molded SO-16 Surface Mount

•

Weight: 0.128 grams (approximate)

•

Body Marked with Logo, and device number

•

Pin #1 defined by DOT on top of package

PACKAGING

•

Tape & Reel EIA Standard 481-1-A

•

13 inch reel 2,500 pieces (OPTIONAL

•

Carrier tubes 50 pcs per (STANDARD)