LSI

LS3262

4 Digit Alarm Clock With Calendar

LCD Drawing

COL

ALM

CHIME

((*))

PM

(4)

(3)

(2)

(1)

Functional Description

(a) After the power on, it switch into clock state and shows

“12:00”(12 hour format). The default value “1 Jan 12:00:00”.

(b) It shows 12 hour format and four group of

“Hour/minute”, “Alarm

time”, “Month/date”, and “second”. In clock state, “Hr : Min”

is shown with colon flashing 0.5 sec on and 0.5 sec off. Press “M”

key to indicate the “Alarm time” (if no key is pressed for 5

seconds, it will auto return to clock state “Hr : Min”), press

“M” key again to indicate the “Month/date” (if no key is pressed

for 5 seconds, it will auto return to clock state “Hr : Min”).

Press again to show the “second”. It can be clear by pressing

“S” key. It will stay in second indication until return to clock

state by pressing “M” key (the colon always on and not flash in

second state, it only flash in clock state “Hr : Min”).

(c) In normal state, press “S” key into the clock setting state. The

first setting is alarm option (alarm on/off or chime on/off), it can

be change by pressing “M” key. Press “S” key to alarm hour

setting, it can be set cycling from “12:

A”(12 hour format) to

“11: A”(12 hour format), “12: P”(12 hour format) to “11: P”(12

hour format) by pressing “M” key. Hold(2 sec) the “M” key will

have auto advance. Press “S” key to alarm minute setting, it can

be set from 0 to 59 by pressing “M” key. Hold (2 sec) the “M”

key will have auto advance. Press “S” key to return normal mode

(with alarm setting) or month setting (without alarm setting), it

can be set from 1 to 12 by pressing “M” key. Hold (2 sec) the

“M” key will have auto advance. Press “S” key to date setting,

it can be set from 1 to 28/30/31(depend the month) by pressing “M”

key. Hold (2sec) the “M” key will have auto advance. Press “S”

key to hour setting, it can be set cycling from “12:

A”(12 hour