TL082-N

www.ti.com

SNOSBW5C – APRIL 1998 – REVISED APRIL 2013

TL082 Wide Bandwidth Dual JFET Input Operational Amplifier

Check for Samples: TL082-N

1

FEATURES

DESCRIPTION

These devices are low cost, high speed, dual JFET

23

•

Internally Trimmed Offset Voltage: 15 mV

input operational amplifiers with an internally trimmed

•

Low Input Bias Current: 50 pA

input offset voltage ( BI-FET II™ technology). They

•

Low Input Noise Voltage: 16nV/

√Hz

require low supply current yet maintain a large gain

bandwidth product and fast slew rate. In addition, well

•

Low Input Noise Current: 0.01 pA/

√Hz

matched high voltage JFET input devices provide

•

Wide Gain Bandwidth: 4 MHz

very low input bias and offset currents. The TL082 is

•

High Slew Rate: 13 V/

μs

pin compatible with the standard LM1558 allowing

designers

to

immediately

upgrade

the

overall

•

Low Supply Current: 3.6 mA

performance of existing LM1558 and most LM358

•

Ω

designs.

•

Low Total Harmonic Distortion:

≤0.02%

These amplifiers may be used in applications such as

•

Low 1/f Noise Corner: 50 Hz

high speed integrators, fast D/A converters, sample

•

Fast Settling Time to 0.01%: 2

μs

and hold circuits and many other circuits requiring low

input offset voltage, low input bias current, high input

impedance, high slew rate and wide bandwidth. The

devices also exhibit low noise and offset voltage drift.

Typical Connection

Connection Diagram

Figure 1. PDIP/SOIC Package (Top View)

See Package Number D0008A or P0008E

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

BI-FET II is a trademark of dcl_owner.

3

All other trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 1998–2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.