LIS2DS12 datasheet(17/68 Pages) STMICROELECTRONICS

17 / 68 page

DocID027753 Rev 4

17/68

LIS2DS12

Mechanical and electrical specifications

2.5

Absolute maximum ratings

Stresses above those listed as “absolute maximum ratings” may cause permanent damage

to the device. This is a stress rating only and functional operation of the device under these

conditions is not implied. Exposure to maximum rating conditions for extended periods may

affect device reliability.

Note:

Supply voltage on any pin should never exceed 2.2 V.

Table 9. Absolute maximum ratings

Symbol

Ratings

Maximum value

Unit

Vdd

Supply voltage

-0.3 to 2.2

Vdd_IO

I/O pins supply voltage

-0.3 to 2.2

Vin

Input voltage on any control pin

(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)

-0.3 to Vdd_IO +0.3

APOW

Acceleration (any axis, powered, Vdd = 1.8 V)

3000 for 0.5 ms

10000 for 0.2 ms

AUNP

Acceleration (any axis, unpowered)

3000 for 0.5 ms

10000 for 0.2 ms

TOP

Operating temperature range

-40 to +85

°C

TSTG

Storage temperature range

-40 to +125

°C

ESD

Electrostatic discharge protection

2 (HBM)

This device is sensitive to mechanical shock, improper handling can cause

permanent damage to the part.

This device is sensitive to electrostatic discharge (ESD), improper handling can

cause permanent damage to the part.

LIS2DS12 数据表(PDF) 17 Page - STMicroelectronics

LIS2DS12 数据表(HTML) 17 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

数据表下载