| 数据搜索系统,热门电子元器件搜索 |
|
AS5403D-HTST 数据表(PDF) 18 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
AS5403D-HTST 数据表(HTML) 18 Page - ams AG |
|
18 / 66 page ![]() Page 18 ams Datasheet Document Feedback [v1-06] 2015-Aug-28 AS5403A/D/E − Functional Description Signal Processing Path Backend Figure 19: Signal Processing Path Backend Note(s) and/or Footnote(s): 1. Yellow → functional block 2. Blue → Readable register 3. Green → Write/readable EEPROM parameter A pre-scale function can be used to extend the angle range. This is in particular needed in sector applications (off-axis) or small linear strokes. This function optimizes the usage of the linearization function in the following step. The linearization takes maximum 33 supporting point. These points are equally spread over the angular range. The post-processing function is able to manipulate the output characteristic in gain, offset and clamping. The digital output switch function uses a comparator. The switching value and hysteresis can be defined. Finally the configuration of the output defines the operation of the output drivers. Angle Pre-Scale Multiplication Pre-Scale Linearization Factor Linearization Table Angle linearized Offset Gain Clamp Low 1 Clamp High 1 Comparator DSW Setting Position 1 Output Selecton OUT Driver Configuration DSW Driver Configuration to DSW Driver to OUT Driver Output Characterisics Post Processing Linerization Angle Offset Angle Offset Clamping 2 Clamp Low 2 Clamp High 2 Position 2 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |