V23832-T2431-M101

V23832-R421-M101

Technical Data

Data Sheet

25

2003-11-19

Figure 14

PCB Layout

1. Figure 14 describes the recommended customer board layout for the PAROLI 2

modules.

2. The holes for the screwing leads and ground plates must be tied to signal ground.

3. Modules must be screwed on the 4 indicated positions (tightening torque should be

typically 10 cNm).

4. Screw size for PCB or heat sink mounting = M1.6.

5. Screw length (PCB mounting) = PCB thickness + 5.2

6. Screw length (heat sink mounting) = heat sink thickness + 3.1

7. Modules can be mounted directly side by side.

8. The dashed lines in Figure 14 indicate the typical keep out area for straight MPO

connectors as well as for the module MPO receptacle in case of central board

placement of the module.

File: 3508

Dimensions in mm