V23832-T2531-M101

V23832-R511-M101

Description

Data Sheet

10

2003-11-19

Regulatory Compliance

The following table shows industry standard test methods and results obtained from the

indicated test methods. (The overall system design will affect the electromagnetic

interference (EMI), electrostatic discharge (ESD) and immunity).

EMI Recommendations

EMI behavior of each PAROLI module revision is evaluated and measured - in order to

ensure a good and sufficient EMI performance of all PAROLI modules. As the total EMI

performance will also depend on system design and to avoid electromagnetic radiation

exceeding the required limits set by the standards, please take note of the following

recommendations.

Feature

Standard

Comments

ESD:

Electrostatic Discharge

to the Electrical Pins

(HBM)

JEDEC Human Body

Model (HBM) Test

Method

EIA/JESD22-A114-B

(MIL-STD 883D

method 3015.7)

Class 1C

Immunity:

Against Electrostatic

Discharge (ESD) to the

Module Receptacle

EN 61000-4-2

IEC 61000-4-2

Discharges ranging from

±2kV to

±15 kV on the front end/face-plate/

receptacle cause no damage to

module (under recommended

mounting conditions).

Immunity:

Against Radio

Frequency

Electromagnetic Field

EN 61000-4-3

IEC 61000-4-3

With a field strength of 3 V/m, noise

frequency ranges from 10 MHz to

2GHz

performance between the

specification limits.

1)

This test covers high frequency bands of mobile phones.

Emission:

Electromagnetic

Interference (EMI)

FCC 47 CFR Part 15,

Class B

EN 55022 Class B

CISPR 22

Noise frequency range:

30 MHz to 18 GHz;

Radiated Emission does not exceed

specified limits when measured

inside a shielding enclosure with

recommended cutout dimensions.

Typically pass with > 11 dB margin

to the limit (under recommended

mounting conditions).