| 数据搜索系统,热门电子元器件搜索 |
|
AP7315 数据表(PDF) 4 Page - Diodes Incorporated |
|
|
|||||||||||||||||||||||||||||
AP7315 数据表(HTML) 4 Page - Diodes Incorporated |
|
4 / 23 page ![]() AP7315 Document number: DS38352 Rev. 1 - 2 4 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 Electrical Characteristics (VEN = VIN = VOUT +1.0V, CIN = COUT = 0.47µF, IOUT = 1.0mA @TA = +25°C, unless otherwise specified.) Parameter Conditions Min Typ Max Units Input Voltage TA = -40°C to +85°C 1.7 — 5.25 V Output Voltage Accuracy (Note 11) VOUT ≥ 2.0V, VIN = VOUT+1V, TA = +25°C VOUT *0.99 VOUT VOUT *1.01 V VOUT < 2.0V, VIN = VOUT+1V, TA = +25°C VOUT - 20mV VOUT VOUT + 20mV V Line Regulation (dVOUT/dVIN/VOUT) VIN = (VOUT – Nom + 1.0V) to 5.25V, IOUT = 1.0mA — 0.02 0.1 %/V Load Regulation (dVOUT/VOUT/dIOUT) VIN = VOUT - Nom + 1.0V, IOUT = 1mA to 150mA — 0.5 1.0 %/A Quiescent Current (Note 6) IOUT = 0mA 20 35 60 μA IOUT = 150mA 30 60 100 ISTANDBY VEN = 0V (Disabled) — 0.01 1.0 μA Output Current — 150 — — mA Fold-back Short Current (Note 7) VOUT Short to Ground — 55 — mA PSRR (Note 8) VIN = (VOUT+1V)VDC + 0.2Vp-pAC, VOUT ≥ 1.8V, IOUT = 30mA f = 1kHz — 75 — dB Output Noise Voltage (Notes 8, 9) BW = 10Hz to 100kHz, IOUT = 30mA — 60 — µVrms Dropout Voltage (Note 5) IOUT = 150mA 1.1V ≤ VOUT < 1.5V — 0.50 0.64 V 1.5V ≤ VOUT < 1.7V — 0.38 0.49 1.7V ≤ VOUT < 2.0V — 0.34 0.44 2.0V ≤ VOUT < 2.5V — 0.28 0.38 2.5V ≤ VOUT < 2.8V — 0.22 0.32 2.8V ≤ VOUT ≤ 3.3V — 0.21 0.29 Output Voltage Temperature Coefficient IOUT = 30mA, TA = -40°C to +85°C — ±30 — ppm/°C EN Input Low Voltage — 0 — 0.5 V EN Input High Voltage — 1.3 — 5.25 V EN Input Leakage VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V -1.0 — +1.0 µA On Resistance of N-channel for Auto-Discharge (Note 10) VIN = 4.0V VEN = 0V (Disabled) — 30 — Ω Notes: 5. Dropout voltage is the voltage difference between the input and the output at which the output voltage drops 2% below its nominal value. 6. Quiescent current is defined here is the difference in current between the input and the output. 7. Short circuit current is measured with VOUT pulled to GND. 8. This specification is guaranteed by design. 9. To make sure lowest environment noise minimizes the influence on noise measurement. 10. AP7315 has 2 options for output, built-in discharge and non-discharge. 11. Potential multiple grades based on following output voltage accuracy. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |